STAIN AID 'ORGANIC STAIN REMOVER'
Duties and taxes included.
#JUSTSEALIT STAIN AID Cleaner for indoor and outdoor natural and engineered stone, tile & concrete.
Ultimate cleaning
Our exclusively formulated solution provides unrivalled removal of organic stains, algae and moss on all natural and engineered stone surfaces.
Superior cleaning power against organic stains
- Ultra concentrate
- Cleans algae and moss
- Cleans red wine
- Cleans tannins
- Cleans leaf stains
- Cleans bird poo
How to use
1. Add one 75ml scoop of this product to 5 litres of hot water.
2. Allow approximately 15 minutes for the powder to fully dissolve.
3. Apply to the affected area.
4. Agitate with a broom or Stone Care Pad Holder Pro and leave for 15–30 minutes. If the desired result is not achieved, repeat steps 1 to 4, or use a stronger blend.
5. Rinse thoroughly.
6. Clean the surface with #JUSTSEALIT Stone Wash.
Size available: 2.5KG (75ml scoop included)
What Surfaces Can I Seal?
You can seal almost all porous hard surfaces, including but not limited to:
- Natural stone (limestone, sandstone, travertine, granite, marble)
- Pavers and concrete
- Porcelain and ceramic tile
- Grout, mortar joints, and render
- Honed or polished concrete
- Cement sheet cladding and stone veneers
- Terracotta and clay surfaces
Not sure if your surface qualifies?
Just send us a quick photo, we’re happy to confirm!
How Long Does The Protection Last?
Our sealers are designed to last indefinitely.
You can optionally reapply after 3–5 years to maintain peak performance, but they’ll never flake, yellow, or peel unlike traditional sealants.
How Much Sealer Do I Need?
Most surfaces will absorb around 10m² or 108 sq ft per litre.
If you’re unsure, send us a photo or drop a message, we’re happy to help with surface type and quantity.
How To Apply?
Prep:
Make sure your surface is clean, dry, and free from dust or residue.
Apply:
- Use the product undiluted.
- Apply two coats wet-on-wet — meaning the second coat goes on while the first is still damp, not dry.
- Use a low-pressure sprayer or microfibre applicator.
Avoid excess pooling or runoff.
When to Apply:
Ideal surface temperature: 10–30°C
Avoid application in rain or direct hot sun.
Before/After
See the difference, Protect your investment!
Before
After
Video
We’ve tried countless sealing solutions over the years, but none have performed as consistently and reliably as #JUSTSEALIT. It’s been our go-to outdoor paving sealer for over a decade, and we’ve seen firsthand the long-term results. We highly recommend it to anyone serious about quality and durability.
You may also be interested in:
