#JUSTSEALIT COMPLETE SURFACE CARE PACK
#JUSTSEALIT COMPLETE SURFACE CARE PACK
Complete General Cleaning & Maintenance System
Routine Cleaning Made Simple. Safe for Delicate Hard Surfaces.
The #JUSTSEALIT COMPLETE SURFACE CARE PACK is a complete cleaning system designed for the general cleaning and ongoing maintenance of natural stone, tile and concrete surfaces.
Formulated neutral pH cleaners and paired with professional-grade tools, this pack is ideal for safely maintaining delicate hard surfaces without harsh chemicals.
What’s Included:
✔ 1L Power Foam – High Foaming Detergent
A gentle, high-foaming cleaner ideal for lifting everyday dirt, dust and light grime. Perfect for use with the JSI Foam Sprayer for even coverage and controlled application.
✔ 1L Stone Wash – Neutral pH Cleaner
A concentrated cleaner designed for routine washing of natural and engineered surfaces.
✔ JSI Foam Sprayer
Creates thick, clinging foam to maximise dwell time and improve cleaning efficiency.
✔ Pad Holder Pro
Professional-grade manual holder for controlled agitation.
✔ Green Cleaning Pad
Medium-duty pad suitable for general scrubbing without damaging sealed or delicate surfaces.
Designed For:
✔ General Cleaning
✔ Ongoing Maintenance
✔ Indoor & Outdoor Surfaces
✔ Sealed & Unsealed Stone
✔ Delicate Natural & Engineered Surfaces
Suitable For:
-
Natural Stone
-
Concrete
-
Porcelain & Ceramic Tiles
-
Bluestone / Basalt
-
Granite
-
Limestone
-
Sandstone
-
Travertine
-
Marble
-
Slate
-
Terrazzo
-
Grout
-
Bricks & Blocks
-
Render
Safe for Use with JUSTSEALIT Sealants
The Complete Surface Care Pack is fully compatible with JUSTSEALIT sealants, making it ideal for both surface preparation prior to sealing and ongoing maintenance after sealing.
✔ Suitable for cleaning before sealant application (surface must be clean, dry and free of residue before sealing).
✔ Safe for use on sealed surfaces for routine maintenance.
✔ Neutral pH formulas will not degrade or strip JUSTSEALIT impregnating sealers when used as directed.
Recommended Maintenance Schedule
To keep surfaces looking their best:
-
Outdoor surfaces: Quick maintenance wash approximately once per month, depending on exposure and traffic.
-
Internal surfaces: Light clean weekly, depending on use and foot traffic.
Regular cleaning helps maintain appearance, supports sealant performance and prevents build-up of dirt and contaminants over time.
Important
The #JUSTSEALIT COMPLETE SURFACE CARE PACK is designed for routine maintenance cleaning.
For removal of specific stains such as efflorescence, rust, oil, tannin, mould or other problem contaminants, we recommend using the appropriate specialty cleaners for best results.
Maintain. Protect. Preserve.
Keep your surfaces looking their best with safe, effective ongoing care.
What Surfaces Can I Seal?
Classic & Plus Sealants:
You can seal almost all porous hard surfaces, including but not limited to:
- Natural stone (limestone, sandstone, travertine, granite, marble)
- Pavers and concrete
- Porcelain and ceramic tile
- Grout, mortar joints, and render
- Honed or polished concrete
- Cement sheet cladding and stone veneers
- Terracotta and clay surfaces
Wood Sealant:
Exterior timber and wood where a natural appearance and low maintenance are required, allowing even greying and a clean, natural patina to develop over time.
Not sure if your surface qualifies?
Just send us a quick photo, we’re happy to confirm!
Will this make the surface slippery?
No. Just Seal It products are impregnating sealers that absorb into the surface rather than sitting on top. When applied correctly, they do not alter the natural slip resistance of the material.
How Long Does The Protection Last?
Our sealers are designed to last indefinitely.
You can optionally reapply after 3–5 years to maintain peak performance, but they’ll never flake, yellow, or peel unlike traditional sealants.
How Much Sealer Do I Need?
Most surfaces will absorb around 10m² or 108 sq ft per litre.
If you’re unsure, send us a photo or drop a message, we’re happy to help with surface type and quantity.
How To Apply?
Prep:
Make sure your surface is clean, dry, and free from dust or residue.
Apply:
- Use the product undiluted.
- Apply two coats wet-on-wet — meaning the second coat goes on while the first is still damp, not dry.
- Use a low-pressure sprayer (rough / textured surfaces) and or microfibre applicator (smooth surfaces).
Avoid excess pooling or runoff.
When to Apply:
Ideal surface temperature: 10–30°C
Avoid application in rain or direct hot sun.
Before/After
See the difference, Protect your investment!
Before
After
Video
We’ve tried countless sealing solutions over the years, but none have performed as consistently and reliably as #JUSTSEALIT. It’s been our go-to outdoor paving sealer for over a decade, and we’ve seen firsthand the long-term results. We highly recommend it to anyone serious about quality and durability.
You may also be interested in:
